Micromeritics ACCUPYC II 1345 Series Installation Instructions And Checklist page 48

Gas displacement pycnometer

Hide thumbs Also See for ACCUPYC II 1345 Series:

Table of Contents

3 Software Installation

8. The Analyzer Configuration window is used to configure the system for each analyzer and

serial number to be installed.

a. In the Step 1 group box:

If...

installing the analysis program dur-

ing initial installation

using the analysis program for off-

line data reduction

moving an analyzer from another

computer to this computer

b. In the Step 2 group box, enter the serial number for each analyzer to be attached to

this computer. The serial number label is located either near the incoming power sup-

ply or near the ON/OFF switch.

c. Click Next.

9. On the Ethernet Ports window, select one option from the following table:

3 - 4

Then...

Select the number of analyzers to be

installed.

Select 0.

AccuPyc II 1345 Installation Instructions and Checklist

134-42875-02 (Rev A) — Jan 2021

Table of Contents

Need help?

Do you have a question about the ACCUPYC II 1345 Series and is the answer not in the manual?