Micromeritics ACCUPYC II 1345 Series Installation Instructions And Checklist page 39

Display Text
Communications
Requesting Address
[ESCAPE] to cancel
Communications
IP Address *
(user entered)
Communications
Subnet Mask *
(user entered)
Communications
Gateway *
(user entered)
Communications
E-mail Address:
Communications
E-mail Server:
AccuPyc II 1345 Installation Instructions and Checklist
134-42875-02 (Rev A) — Jan 2021
Description
If an address cannot be determined, this prompt is displayed:
Press Alt + CLEAR to cancel the operation and return to the Reload
prompt. Contact your IT department, or choose the Specify option and
enter the appropriate information.
Displays when the Specify option is selected. Enables entry of an
appropriate IP address. This is a numerical field in the following format:
nnn.nnn.nnn.nnn. Enter the address.
Enables entry of the subnet mask number. Enter the subnet mask
number.
The Gateway address is used for communicating outside the local
network. The Gateway address is often the same as the IP address,
with a "1" after the last dot instead of the last three characters
(nnn.nnn.nnn.1). Contact your IT department with any questions.
When connected to a network, analysis or calibration results can be e-
mailed automatically upon their completion. This prompt enables entry
of the e-mail address where results are to be sent.
If not using DHCP and the e-mail address is outside the local network,
specify a gateway address (see previous prompt). A keyboard is
required to type in the e-mail address.
Enables entry of the numerical address of the SMTP server. If this
address is unknown, contact your IT department.
Configure the Pycnometer using the Keypad
2 - 17