Analytical Balance - Micromeritics ACCUPYC II 1345 Series Installation Instructions And Checklist

Gas displacement pycnometer

Hide thumbs Also See for ACCUPYC II 1345 Series:

Table of Contents

3 Software Installation

NALYTICAL

ALANCE

The analytical balance tested by Micromeritics is Scientec model #ZSA120.

An analytical balance can be connected to a serial port on the computer and used to transfer the

sample's mass directly to the AccuPyc II application.

1. Connect the analytical balance to the RS232 port on the rear panel of the analyzer.

2. Go to Options > Configure Balance to connect and set up an RS232 balance to the ana-

lyzer.

Configure Balance

Field or Button

Enable / Disable

Serial Parameter

Serial Port

3 - 8

Description

Select to enable or disable the attached balance.

Used to set the baud rate, parity, data bits, and stop bits. This field

should not require modification from the default values.

Select which serial port is used to connect the balance to the analyzer.

AccuPyc II 1345 Installation Instructions and Checklist

134-42875-02 (Rev A) — Jan 2021

Table of Contents

Need help?

Do you have a question about the ACCUPYC II 1345 Series and is the answer not in the manual?