Monitor Presence Icons - NEC DT820 Series User Manual

4
5
6
Table 7.5
DT820 Phone User Guide
3
Select Speed Dial.
Use the telephone keypad to enter a Speed Dial number for the entry and press Enter
on the cursor pad or the OK softkey.
Speed Dial entries can be internal or external numbers.
The number of available Sped Dial Keys and their associated numbers depend on
your model of phone. For more information on the valid Speed Dial Keys for the
specific phone models, see "Speed Dial Key Numbering" in the user guide for your
phone.
• You can also press the Delete softkey to delete the last character entered, or
press the Cancel softkey to return to the previous screen.
Select the monitor settings for this entry and press Enter
OK softkey.
Monitoring can only be done on other lines that are internal to your system.
Note:
You cannot monitor external or outside lines.
Valid options for monitoring are:
1
• None - Do not monitor presence state changes for this Speed Dial Key
2
• Visual - Presence state is shown visually using the LED on the Speed Dial Key,
and a Presence icon is shown in the Personal Directory.
3
• Visual and Soft Ring - Presence state is shown visually using the LED on the
Speed Dial Key, and a Presence icon is shown in the Personal Directory. When a
call is ringing on the monitored terminal, play a soft ring tone.
3
Option Visual and Soft Ring is only valid for SIP@Net platforms. Contact
Note:
your system administrator to determine if Soft Ring is available on your
system.
If you have Visual Monitor Settings for an entry in the Directory that also has an
assigned Speed Dial, the presence (Available, Busy or Offline) of the line is shown in
the Directory.

Monitor Presence Icons

Type
Line Key Registered
Unregistered
Speed Dial Key Not Available
(No Monitoring)
Status Icon
P R O G R A M M A B L E K E Y S
Speed Dial and Programmable Keys
b
on the cursor pad or the
b
7 -75