To Place A Call To A Member Of Your Workgroup; To Pick Up A Ringing Call To A Member Of Your Workgroup; Transfer Key - NEC DT820 Series User Manual

To pla c e a c al l to a m em ber of yo ur wor k g ro u p
•
1
2
1
2
3
Figure 9.2
To pic k up a ri n g i ng c al l to a m em be r o f y o u r wo rk g ro u p
•
9 -142
D T 8 2 0 C O L O R M I C R O B R O W S E R A N D E N H A N C E D P R O G R A M M A B L E K E Y S
Enhanced Programmable Keys
• To place a hands-free or headset call: Press the key for the workgroup
member, then use your headset or the phone's speaker to continue the call on
your phone.
• To use your phone handset for the call: Pick up your phone handset, then
press the key for the workgroup member to pick up the call from that address.
M U L T I - P R E S S B E H A V I O R
You can use a programmed key to place calls to other workgroup members.
While your phone and the other workgroup member's phone is idle, do one of the
following:
To place a hands-free or headset call:
Press the key for the workgroup member you want to call.
An outbound call is made to the workgroup member.
Use your headset or the phone's speaker to continue the call on your phone.
To use your phone handset for the call:
Pick up your phone handset.
Press the key for the workgroup member.
An outbound call is made to the workgroup member.
Continue the call on your phone.
Non-idle call states:
• If you are on a call, you will see a screen that gives you the option to Blind transfer
your currently held call to that workgroup member.
If you actually want to place an attended/consult transfer call rather than a
Note:
Blind transfer call, press the Transfer key on your phoneset. Once an
attended/consult transfer is started, use the Transfer key on the phoneset to
complete the transfer.

Transfer Key

• If the user has a call on hold, you will see a screen that gives you the option to
Pickup the call on that user's line.
If you are set up for a workgroup, you will see a flashing red LED when there is a
ringing call on any other workgroup member's phone.
While your phone is idle and the other workgroup member's phone is ringing, do one of
the following:
DT700 Phone User Guide