Lcd Screen/Display; The Lcd Is Too Light Or Dark; I Want To Adjust The Time The Lcd Stays Lit; I Need To Reset The Language On My Phone - NEC DT820 Series User Manual

4
The LCD i s too l i ght or d ark
•
I wa n t to adj ust t he t ime the LC D stay s lit
1
2
3
4
5
6
I ne e d to rese t t h e l an guage on my ph on e
1
2
3
4
The Cal l Hi stor y i nf or mation on my pho ne is g o n e
DT820 Phone User Guide
If you cannot
Note: restart
and the network for ten seconds, then reconnect the telephone to your
network and power to perform a
If you are still having problems with your phone, contact your system administrator.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
L C D S C R E E N / D I S P L A Y
Press the Menu key and select
then use the softkeys to adjust the LCD contrast.
You can adjust the timeout of the LCD backlight on your phone. You can specify a
value between 0 (None) to 255 seconds.
Press the Menu key.
3
Select User Settings.
6
Select LCD Settings.
2
Select LCD Backlight Timeout.
The default backlight timeout, in seconds, for your system is shown. To change the
timeout, press the Delete softkey and use the telephone keypad to enter new backlight
timeout.
b
Press Enter on the cursor pad or the OK softkey to accept the setting.
You can also press the Cancel softkey to exit without making any changes.
Setting the Backlight Timeout to 0 (zero) disables the timeout, and the LCD
Note:
Backlight will remain lit at all times.
The language on your phone may reset to either the default for your system or the
default for the phone (English) when you restart the phone, depending on the
configuration of your system.
Press the Menu key.
3
Select User Settings.
4
Select Language.
Select the desired language and press Enter
accept the setting.
The new menu screens will now display in the language you have selected. You do
not need to restart the phone to change the language.
You can also press the Cancel softkey to exit without making any changes.
The default language on the phone is English.
Note:
Call History information (Missed, Received and Placed Calls) is deleted when the
phone is restarted. If you did not reboot your phone, your phone may have been
the phone using the Menus, unplug the phone from power
.
restart
3 6
User Settings,
b
on the cursor pad or the OK softkey to
P H O N E T R O U B L E S H O O T I N G

LCD Screen/Display

1
LCD Settings, LCD Contrast,
11 -181