To Place A Call On Exclusive Hold - NEC DT750 User Manual

on the display.
Status icon changes as follows:
31313
Any station with this line appearance can retrieve the
TIP
call.
Line key will be disabled while the information of XML
application is displayed on to the LCD. DT750 placing
Note
other line on hold by pressing
the call pressing
Mode.
Conditions for Hold Fixation Mode;
- Exclusive Hold cannot use at the same time.
Note
- When collaborating with Softphone, this service is not
available.
• IF UNANSWERED
STEP 1: After preprogrammed time, Automatic Recall
is initiated.
STEP 2: Call Indicator lamp flashes and the user
hears Automatic Recall Ringer.
Status icon changes as follows:
31313
Flashing
HOLD
can bring back
HOLD again, in Hold Fixation
TO PLACE A CALL ON EXCLUSIVE
HOLD
This feature allows a user to place a call on hold and to
exclude all other users from retrieving the Held Call.
STEP 1: While engaged in a Two-party call:
Line Key which is being used
STEP 2: Press
HOLD
lows:
Status icon changes as follows:
Flashing
E_HOLD
1:25 PM
MIC
STEP 3: Replace the handset.
• TO RETRIEVE
STEP 1: Lift handset or press
108
31313
twice. The LCD displays as fol-
31313
31313
Held Station Number
XXXX
MON 12 JUL 2010
>>>
.
Speaker