Call Options; To Place A Call On Exclusive Hold; To Transfer A Call; To Establish A Broker Call - NEC NEAX 2000 IVS2 User Manual

- CALL OPTIONS

TO PLACE A CALL ON EXCLUSIVE HOLD

Press Hold twice. Line appearance indicates interrupted wink.
NOTE: If held line appears on other D stations, LED remains steadily lit red.
term
TO RETRIEVE
Lift handset or press Speaker.
Press held line. Use handset to converse.
NOTE: Only D that set Exclusive Hold option can retrieve the call.
term
®
IF UNANSWERED
After preprogrammed time, Automatic Recall is initiated.
Visual and audible signal (rapid flash and ring burst) is sent to station
which placed call on Exclusive Hold. Recall shows as a flashing green
LED on your phone, and solid red on other phones with same line.
NOTE: Exclusive Hold excludes any other phone from picking up your held call. Exclusive Hold shows
as a flashing green LED on your phone. The same line on other phones appears as a solid red LED.

TO TRANSFER A CALL

After conversing, ask party to hold.
Press Transfer. Receive interrupted dial tone.
Dial destination station's extension, hang up or wait for answer.
NOTE: "TRANSFER" is only displayed when "TAPI" mode is enabled for your extension.
EHOLD 2001
CONFERENCE
With call in progress, ask party to hold.
Press Transfer to receive interrupted dial tone.
Dial desired number.
After call is answered, press Conf, Conf LED lights.
Three- way conference is established.
If one party hangs up, other two remain connected. Conf LED goes out.

TO ESTABLISH A BROKER CALL

While engaged in a call and wishing to consult a third party, press
Transfer. Caller is automatically placed on hold.
Dial desired party to consult.
Press Transfer to return to original caller. Third party is automatically placed on hold.
Repeated depression of the Transfer button allows you to alternate between calls.