Wall Mounting - DETEWE OpenCom 100 Mounting And Commissioning

Do not position the OpenCom 100:
in front of or above heat sources
such as radiators,
in direct sunlight,
behind curtains,
in small, unventilated, damp
rooms,

Wall Mounting

The OpenCom 100 is mounted on
the wall with three screws as shown
in this diagram:
B
184
D
In order to fasten the screws at
points B and C, remove the cover of
the OpenCom 100 and insert the
screws in the holes provided for this
purpose. The OpenCom 100 is sus-
pended from the screw at point A:
there must therefore be a space of 3
mm between the screw and the wall.
Installation
A
332
C
134
on or near inflammable materi-
als,
or near high-frequency devices
such as transmitters, X-ray or
similar apparatus.
Use a separate 230-V power circuit
and install overvoltage protection.
Wall Mounting
11