Factory Settings On Delivery; Telephony Functions; Opencom 105; Opencom 110 - DETEWE OpenCom 100 Mounting And Commissioning

Factory Settings on Delivery

The following basic settings and
features are active on delivery. We
recommend that you configure the
OpenCom 100 to your individual

Telephony Functions

OpenCom 105

The S
0
multi-terminal access, the S
port for system access.
The S
0
figured as internal S
the call numbers 20 and 21.
The four U
ured for OpenPhone 63 system
telephones with the call num-
bers 30 to 33.
The four a/b ports are config-
ured for analogue devices with
the call numbers 10 to 13.
6
Telephony Functions
1 port is configured for
3 and S 4 ports are con-
0
buses with
0
ports are config-
pn
requirements before putting it into
operation (see Configuration starting
on page 24).

OpenCom 110

The S
2 multi-terminal access, the S
0
port for system access.
The S
configured as internal S
with the call numbers 20 to 22.
The eight U
ured for OpenPhone 63 system
telephones with the call num-
bers 30 to 37.
The four a/b ports are config-
ured for analogue devices with
the call numbers 10 to 13.
Factory Settings on Delivery
1 port is configured for
0
3, S 4 and S 5 ports are
0 0 0
buses
0
ports are config-
pn
2
0