DETEWE OpenCom 100 Mounting And Commissioning page 16

One S
bus, realised as pressure clamps
(S 5)
0
Eight U
sure clamps (U
One LAN port (10BaseT), real-
ised as an RJ-45 socket
One Sync port for connection to
another communications sys-
tem, realised as pressure clamps
(Sync).
One COM port for connection to
a PC for configuration or transfer
of call data, realised as a 9-pole
Sub-D port (V.24)
OpenCom 120
6 switchable S
be connected to either an inter-
nal or an external S
ternal port is realised as a pres-
sure clamp, the external one as
an RJ-45 socket
18 U
sure clamps (U
Two LAN ports (10BaseT), real-
ised as RJ-45 sockets. The sec-
ond LAN port of the OpenCom
120 is intended only for net-
working two OpenCom 120/120
or 110/120 systems.
14
Ports
port for an internal S
0
ports, realised as pres-
pn
1 to U 8)
pn pn
ports, which can
0
bus. The in-
0
ports, realised as pres-
pn
1 to U 18)
pn pn
One Sync port for the synchroni-
0
sation with another communica-
tions system, realised as pres-
sure clamps (Sync)
One COM port for connection to
a PC for configuration or transfer
of call data, realised as a 9-pole
Sub-D plug (V.24)
Installation