Kettler YT 6710-7 Training And Operating Instructions page 15

2. Training With Settings
display: "Training Readiness"
• Press " ": settings area
Time Setting (min)
• With , enter value (e.g., 30:00)
onfirm with " ".
Display: next menu "COURSE"
Setting Course (miles or km)
• With enter value (e.g., 7.5)
Confirm with " ".
Display: next menu "ENERGY"
Setting Energy (kcal or KJoule)
• With enter value (e.g., 780)
Confirm with " ".
pulse monitoring
• enter values with (e.g., 130)
Confirm with .
If the pulse rate rises above the input value during training
– not at a standstill – the value starts to flash.
• pedaling
With standard settings, the system counts down.
Note:
Settings are saved and used during the next training sessi-
on.
Training Pause or Training End
With less than 14 pedal rpm, the device's electronics
recognize a Training Pause. Rotations and Speed are
represented as Average Values with the Ø symbol.
The Training Data is displayed for 4 minutes. If, during
this time, you press no keys and do not train, the electro-
nics will switch to Standby mode.
Training Resumption
If Training is continued within 4 minutes, the last values
will be further counted or counted down.
YT 6710-7
15
EN