Kettler YT 6710-7 Training And Operating Instructions page 11

short description
The electronics have a display area with variable symbols and
graphics, and a functional area with buttons.
quick guide
functional area
The four buttons are briefly explained below.
press briefly
This function button is used to call up entries.
The set data is transferred.
press longer (Reset)
The current display is deleted for a restart.
Left / Right
These function buttons are used to change values in the
default values.
• long press and hold>
fast scan of values
• press "Left" and "Right" together:
value input jumps to OFF (- -)
and the display ranges are changed.
With this function button the automatic display change in
the 5" mode is switched on and off.
Pulse measurement
The pulse is measured by hand pulse sensors. The connec-
tor is located on the back of the display.
indication range
display
functional area
buttons
YT 6710-7
11
EN