Advertisement
Float Lock Kit - Optional
Float Lock Kits prevents the Wings from floating which
allows for the weight to transfer in softer field conditions.
1. Place Wing Float Stops into the Center Frame
Yoke/Guide. See Figure 2-27.
2. Place a Wing Float Stop Plate on each side of the
Wing Float Stops. Insert 3/8-16 x 3-1/2 Bolts from the
inside outward.
3. Place Float Lock Spacers against the rear Wing Float
Stop Plate. Secure with 3/8-16 Flange Locknuts.
Bolt,3/8-16 x 3-1/2
2-32
TABLE OF CONTENTS
Wing Float Stop Plate
Figure 2-27: Float Lock Kit - Optional
Wing Float Stop
Wing Float Stop Plate
Float Lock
Spacer
Flange
Locknut,
3/8-16
F-1108-0121
Advertisement
