Landoll Brillion WFPD23 Operator's Manual page 39

Wing Rest Installation, WFP 31-37
1. Install the RH and LH Wing Rest to the RH and LH
Wing Frame 4-Hole Plate located under the Wing
Frame Tube. Secure with 5/8-11 x 7 Bolts, Flat
Washers and Flange Locknuts. See Figure 2-21.
Bolt,3/8-16 x 1-1/2
Wing Rest Bumper Pad
Locknut,3/8-16
Flange Locknut
Flat Washer,1/2
Bolt,1/2-13 x 7
F-1108-0121
TABLE OF CONTENTS
Wing Rest LH
Used on WFP31-37
Figure 2-21: Wing Rest Installation, WFP 31-37
2. Attach the Wing Rest Bumper Pads onto the top of the
RH and LH Wing Rest with 3/8-16 x 1-1/2 Flat Head
Screws and Locknuts.
Wing Rest Bumper Pad
Bolt,3/8-16 x 1-1/2
Locknut,3/8-16
Wing Rest RH
Used on WFP31-37
Flange
Locknut
Flat Washer,1/2
Bolt,1/2-13 x 7
2-25