Landoll Brillion WFPD23 Operator's Manual page 38

Wing Rest Installation, WFP 23-29
1. Install the RH Wing Rest to the RH Wing Frame
4-Hole Plate located on the top of the Wing Frame
Tube. Secure with 1/2-13 x 2 Bolts, Flat Washers and
Flange Locknuts. See Figure 2-20.
2. Install the LH Wing Rest LH to the LH Wing Frame
4-bolt Plate located on the side of the Wing Frame.
Wing Rest LH
Used on WFP23-29
Flange Locknut,
1/2-13
2-24
TABLE OF CONTENTS
Wing Rest RH
Used on WFP23-29
Flat Head Screw,
3/8-16 x 1-1/2
Locknut,3/8-16
Figure 2-20: Wing Rest Installation, WFP 23-29
Secure with 1/2-13 x 2 Bolts, Flat Washers and
Flange Locknuts.
3. Attach the Wing Rest Bumper Pads onto the top of the
RH and LH Wing Rest with 3/8-16 x 1-1/2 Flat Head
Screws and Locknuts.
Wing Rest Bumper Pad
Wing Rest Bumper Pad
Bolt,1/2-13 x 2
Flat Washer,1/2
Flat Head Screw,
3/8-16 x 1-1/2
Locknut,3/8-16
Flange Locknut
Flat Washer,1/2
Bolt,1/2-13 x 2
F-1108-0121