Advertisement
Drawbar Jack, Hose Support and
Manual Storage Canister
Installation
1. Assemble the Jack Mount to the Jack with 1/2-13 x
1-1/2 Bolts and Locknuts in the four upper holes.
Attach the Jack to the drawbar by slipping the Jack
sleeve into the Drawbar sleeve and inserting the Jack
3/4 Pin with Chain.
Bolt,5/8-11 x 2-1/4
Hose
Support
Hose
Support
Bolt,
5/8-11 x 2-1/4
Washer,
5/8 x 2 x 3/8
F-1108-0121
TABLE OF CONTENTS
Rigid Drawbar
Locknut,1/2-13
Washer,
5/8 x 2 x 3/8
Flange
Locknut,5/8-11
Pin w/Chain,3/4
Flange
Locknut,5/8-11
Figure 2-9: Drawbar Accessories Installation
2. Attach the Hose Support to the Drawbar with 5/8-11 x
2 1/4 Bolt, 5/8 x 2 x 3/8 Washer and Flange Locknut.
3. Install the Manual Storage Canister to the Drawbar
Mount with Hose Clamp.
Jack
Pin W/Chain,3/4
Jack Mount
Bolt,
1/2-13 x 1-1/2
Bolt,
1/2-13 x 1-1/2
Jack
Mount
Manual Storage
Canister
Hose Clamp
Hose Clamp
Manual Storage
Canister
Drawbar
Locknut,1/2-13
Jack
2-11
Advertisement
