Advertisement
Scraper Adjustment
NOTE
Notched Roller Wheel Scrapers are optional and
reversible.
Notched Roller Wheel Scrapers are designed to keep the
Notched Roller Wheels from building up with moist soil
during operation. Adjustment of the Scrapers will be
necessary as the Roller Wheels and/or the Scrapers
wear.
Notched Wheel
3-8
TABLE OF CONTENTS
Center Scraper
Mount
Wing Frame
Notched Wheel
Figure 3-8: Scraper Adjustment
1. Unfold and Lower Pulverizer on a level surface.
2. Push Notched Wheels against welded Roller Axle
End Stops and add Clamp End Spacers if needed.
See Fig 4-5 and 4-6.
3. Adjust Scrapers as needed to obtain a 1/4" gap
between the Scraper and Notched Wheel. See
Figure 3-8. Scrapers are 1/4" thick and can be used
to set the 1/4" gap.
Scraper
1/4"
Center Frame
Wing Scraper
Mount
Scraper
1/4"
F-1108-0121
Advertisement
