Advertisement
LED Warning Lamps
When plugging in the LED 7-pin connector:
1. Make sure the tractor has a good clean receptacle,
free of dirt and corrosion.
2. Make sure the 7-pin connector is inserted ALL the
way in. With tighter fitting pins, operator may think the
connector is all the way in, but really isn't.
3. Make sure the tractor receptacle cover latches over
the keyway on the 7-pin connector to hold the
connector in place.
If an operator plugs in the 7-pin connector, but the lights
do not seem to work right, check the above items to
make sure there is a good connection with the 7-pin
connector.
F-1108-0121
TABLE OF CONTENTS
a
Amber
LED Lamp
LED Warning
Lights Harness
Red LED Lamp
Flasher Control
Module
7Pin/4Pin
WP Harness
Figure 4-9: LED Warning Lamps
Amber
LED Lamp
4-11
Advertisement
