Xilinx Virtex UltraScale FPGA VCU1287 Getting Started Manual page 58

12. In the sources window, Design Sources should now show the IBERT design example
(Figure 2-21).
X-Ref Target - Figure 2-21
13. Click Run Synthesis from the Flow Navigator to synthesize the design
14. When the synthesis is done, a Synthesis Completed window opens. Select Run
Implementation and click OK
15. When the implementation is done, an Implementation Completed window opens. Select
Generate Bitstream and click OK
16. When the Bitstream Generation Completed dialog window appears, click Cancel
(Figure 2-14).
17. Navigate to the
...\ibert_ultrascale_gty_0_example\ibert_ultrascale_gty_0_exampl
e.runs\impl_1 directory to locate the generated bitstream.
VCU1287 IBERT Getting Started Guide
UG1203 (v2016.4) December 15. 2016
Figure 2-21: Design Sources File Hierarchy
(Figure 2-12).
(Figure 2-13).
www.xilinx.com
Chapter 2: Creating the IBERT Cores
X15585-121416
(Figure
Send Feedback
2-11).
58