Setting Up The Vivado Design Suite - Xilinx Virtex UltraScale FPGA VCU1287 Getting Started Manual

Setting Up the Vivado Design Suite

1. Connect the host computer to the VCU1287 board using the second standard-A plug to
micro-B plug USB cable. The standard-A plug connects to a USB port on the host
computer and the micro-B plug connects to J165, the Digilent USB JTAG configuration
port on the VCU1287 board
2. Start the Vivado Design Suite on the host computer and click Flow > Open Hardware
Manager (highlighted in
X-Ref Target - Figure 1-23
Figure 1-23: Vivado Design Suite, Open Hardware Manager
VCU1287 IBERT Getting Started Guide
UG1203 (v2016.4) December 15. 2016
Chapter 1: VCU1287 IBERT Getting Started Guide
(Figure 1-13).
Figure 1-23).
www.xilinx.com
X15553-121416
31
Send Feedback