Unpacking & Set Up; Unpacking - Siemens CLINITEK Status Operator's Manual

1 Unpacking & Set Up

Unpacking

Unpacking
1 Carefully remove the contents
of the shipping carton. Check the
carton and instrument for visible
signs of damage; if seen,
immediately contact the carrier.
1
Clinitek Status ®
2
Test table
Do not touch the white
calibration bar.
3
Test table insert
If you are using a reagent strip
that has 4 or fewer test pads,
®
e.g., Uristix 4, you must use a short
test table insert. This has to be ordered
separately (for a list of suppliers see
Appendix A, Local Technical Support
Providers and Distributors).
1
5
3
+ analyzer
2 Remove each of the wrappings
and check for the following items:
4
2
Power Supply
4
If the power cord is not the style
you need, contact your local
representative (for a list of contacts see
Appendix A, Local Technical Support
Providers and Distributors).
5
Paper Roll
Depending on the model you have
received, there may also be a Warranty
Registration Card, Unpacking/Setup Guide,
and/or Quick Reference Guide included.
1-1