Siemens CLINITEK Status Operator's Manual page 40

4 Testing
Quick Tests
If the analyzer has been set up to
automatically print the results, the
Printing screen will be displayed
until the print out has been
completed (otherwise the Results
screen will appear).
The date, time and test sequence
number will be printed along with
the test results.
The next screen displayed is the
Results screen. The test results
are displayed on the screen and
the test table and cassette are
pushed out of the analyzer.
The results will be printed automatically
if this option is set up in the
analyzer. If not, touch Print to print
the results on the analyzer's printer.
The results will automatically be
sent to the connected PC if this
option is set up in the analyzer.
If you require further instruction
regarding how to set up the analyzer
so results are automatically printed or
sent to a computer see Section 5,
Instrument Set Up.
Remove the used cassette and
dispose of it according to your
standard laboratory procedures.
Report the results to a laboratory
supervisor or physician.
Touch Done to complete the test
and return to main Select screen.
4-12
If the result is positive, an
asterisk* will appear next to the result
(if "mark positive results" was
selected in Instrument Set Up).
The result will be displayed on
the screen for 2 minutes. After this
time elapses, the display will return to
main Select menu.