Siemens CLINITEK Status Operator's Manual page 69

5 Instrument Set Up
Intrument Settings
Setting Strip Information Prompt
To set the prompt for strip
information, perform the following
steps:
1. At the Select screen, touch
Instrument Set Up.
The Choose Settings screen
displays.
2. Use the arrow keys to select
Instrument Settings.
3. Touch Enter.
The Instrument Settings screen
displays.
4. Use the arrow keys to select
Urinalysis Test Settings.
5. Touch Select.
The Urinalysis Test Settings
screen displays.
6. Touch Next.
The Urinalysis Test screen
displays.
7. To prompt for strip information
before each test, touch
Enabled.
To bypass a prompt to enter
strip information before each
test, touch Disabled.
8. Touch Done 3 times to return to
the Select screen.
5-13