Set Up; Analyzer Set Up; Plugging Analyzer In; Installing Batteries - Siemens CLINITEK Status Operator's Manual

1
Unpacking & Set Up

Set Up

Set Up
3

Analyzer Set Up

Place the instrument on a level
work surface where the
temperature and humidity are fairly
constant.
4

Plugging Analyzer In

Plug the appropriate end of the
power cord into the power inlet
socket located on the rear of the
Clinitek Status+ analyzer. Plug the
other end of the power cord into an
AC electrical wall outlet.
Only use the power supply
adapter included with the unit.
5

Installing Batteries

(Optional)
Place the analyzer on its side and
remove the battery cover by
pressing down on the tab and
pulling out. Place the 6 new
alkaline AA-size batteries into the
analyzer. Replace the battery cover
and turn the instrument back onto
its base.
1-2
The best temperature for using
the instrument is between 22
° ° °
26 C (72 F and 79 F). Do not place
the analyzer outside or near
windows, ovens, hot plates, or
radiators.
°
C and