Siemens CLINITEK Status Operator's Manual page 42

4 Testing
Full Tests
The next screen that appears is
Operator Name.
There are two options under
Operator Name: Last Operator or
Enter New Operator Name.
Option 1: Last Operator
If this option is enabled, the last
operator that entered his/her Name
will be displayed on the screen in
the lower right side of the box. If
you are this operator, then touch
the Last Operator button to
proceed.
Option 2: Enter New Operator
Name
In order to enter the information for
a new operator, touch Enter New
Operator Name button. The next
screen that is displayed is Enter
Operator Name.
Use the keyboards to enter
Operator Name using a maximum
of 13 characters. Touch Enter
when you have finished entering
the Name and to move to the next
screen.
If you require further instruction
regarding keyboard usage see
Section 2, Interacting with the Touch
Screen.
4-14