Siemens CLINITEK Status Operator's Manual page 75

5 Instrument Set Up
Instrument Settings
System Settings
This allows selections regarding the
printer, power and sound.
System Settings
Screen 1 of 2
Printer – allows you to select the
preferred printing option by
touching the round button.
Automatic – Results for
each test will be printed
automatically when the test
is complete.
Manual – Test results will
not be printed automatically.
They can be printed by
touching the Print selection
area on the Results
screen.
Off – Test results will not
be printed.
Power Save – allows you to enable
and disable this feature. If the
instrument is powered from an
electrical outlet and is not used for
5 minutes, you may choose to have
the test table retract and the
instrument power down. When it is
powered by batteries, Power Save
is always enabled and it will power
down after 5 minutes of non-use.
Touch the Enabled (on) to activate
or Disabled (off) if the Power Save
mode is not desired.
5-19