Commissioning (Settings/Options In The Actuator); Switch Compartment: Open/Close - AUMA SAVEx 07.2 Operation Instructions Manual

Multi-turn actuators
Hide thumbs Also See for SAVEx 07.2:
Table of Contents

Advertisement

SAVEx 07.2
SAVEx16.2 / SARVEx 07.2
ACVExC 01.2 Non-Intrusive EtherNet/IP
10.

Commissioning (settings/options in the actuator)

10.1.

Switch compartment: open/close

SARVEx16.2 Control unit: electronic (MWG)
For actuators without mechanical position indicator (cover without indicator glass),
no settings are required within the actuator when commissioning.
Figure 62: Mechanical position indicator (self-adjusting)
When equipped with the self-adjusting mechanical position indication, the position
indication automatically adjusts upon the initial operation (e.g. from CLOSED to
OPEN). This self-adjustment is generally performed when setting the limit switches
(approaching the end positions). Manual setting and consequently opening the switch
compartment is not necessary when commissioning.
Figure 63: Mechanical position indication via indicator mark (not self-adjusting)
In case the mechanical position indicator integrated within the actuator is NOT
self-adjusting [B], the switch compartment must be opened for mechanical position
indication adjustment when commissioning.
Figure 64: Open/close switch compartment
[A]
Mechanical position indication (self-adjusting)
[B]
Mechanical position indication via indicator mark
Commissioning (settings/options in the actuator)
63

Advertisement

Table of Contents
loading

Table of Contents