Commissioning (Settings/Options In The Actuator); Switch Compartment: Open/Close - AUMA SAVEx 07.2 Operation Instructions Manual

SAVEx 07.2

Commissioning (settings/options in the actuator)

11. Commissioning (settings/options in the actuator)
11.1.

Switch compartment: open/close

78
SAVEx16.2 / SARVEx 07.2
For actuators without mechanical position indicator (cover without indicator glass),
no settings are required within the actuator when commissioning.
When equipped with the self-adjusting mechanical position indication [A], the position
indication automatically adjusts upon the initial operation (e.g. from CLOSED to
OPEN). This self-adjustment is generally performed when setting the limit switches
(approaching the end positions). Manual setting and consequently opening the switch
compartment is not necessary when commissioning.
In case the mechanical position indicator integrated within the actuator is NOT
self-adjusting [B], the switch compartment must be opened for mechanical position
indication adjustment when commissioning.
Figure 86: Mechanical position indications
[A] Mechanical position indicator (self-adjusting)
[B] Mechanical position indication via indicator mark (not self-adjusting)
Figure 87: Open/close switch compartment
[A] Mechanical position indication (self-adjusting)
[B] Mechanical position indication via indicator mark
SARVEx16.2 Control unit: electronic (MWG)
ACVExC 01.2 Non-Intrusive Profibus DP