Helm Systems - Regal LS4 Owner's Manual

Helm Systems

GLOVE BOX
STORAGE
TILT
STEERING
LEVER
SELECTED
OPTIONS
SHOWN
DC FUSE PANEL
BEHIND HELM
Helm Overview- (Typical)
The helm station is equipped with the ability to
monitor engine functions through a Garmin chart
plotter. Close observation of the digital display is
recommended throughout the trip as you can split
the screen to accommodate GPS functions along
with monitoring basic engine systems including
fuel usage and hours for maintenance cycles. This
works in addition to the engine manufacturer's
information panel system.
GARMIN
CHART PLOTTER
IGNITION
20 AMP IGNITION
SWITCH
BREAKER
ENGINE
INFORMATION
PANEL
BLOWER
SWITCH
Select models with the dual chart plotter option
another whole dimension of information monitoring
is achievable. Note that with the battery switches
in the "off" position, there is no power to the helm
and the ignition switch will not function.
All electrical features are protected by the main
battery management panel located in the sump.
Refer to earlier pages in this chapter for additional
information. Note to read and understand the
blower operation information on the bottom of
the breaker panel.
TRIM TAB
PANEL
BREAKER PANEL
AUTOMATIC FIRE
EXTINGUISHER
GAUGE.
GAS VAPOR
DETECTOR
REMOTE
CONTROL
SAFETY
LANYARD
69