Power Platform - Regal LS4 Owner's Manual

Hide thumbs Also See for LS4:
Table of Contents

Advertisement

Power Platform

TYPICAL UNIT-UP POSITION
If installed on your vessel the power
platform features the ability to lower
a seat structure into the water and
also extend it out a bit from the swim
platform. It permits a person to sit
on the seat of the platform while it is
submerged at varying degrees in the water.
There is a switch on the transom to control the
movement of the platform.
Note that the transom boarding ladder is recom-
mended for entering and exiting the water.
Make sure the drive is trimmed in as far as possible
and the keys removed from the ignition switch be-
fore attempting to use the power platform. Use the
platform for sitting only. Do not stand, jump, or dive
from the device. There is a 20 amp fuse part of
a fuse panel located on the battery management
panel board accessible through the engine hatch.
Supervise small children around power platform!
CAUTION
AVOID INJURY OR PROPERTY DAMAGE!
ENSURE THAT POWER PLATFORM IS IN
THE UP POSITION
AND CLEAR OF ALL OBJECTS
BEFORE STARTING THE ENGINE!
CAUTION
AVOID INJURY OR PROPERTY DAMAGE
DUE TO IMPROPER OPERATION!
STERN DRIVE MUST BE TRIMMED
BELOW 20 DEGREES
OR FULLY CENTERED
TO OPERATE POWER PLATFORM.
ENGINE MUST BE OFF.
175

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lx4Ls6Lx6

Table of Contents