Bow Filler Cushion
Your vessel may include an a bow fi ller cushion.
Your vessel's appearance may vary from below. To
set up the fi ller cushion follow these steps:
1. Find the fi ller cushion which is stored in one
of the bow storage compartments accessible by
lifting the seat cushion.
1
STORAGE
2. Locate the support bars which normally are
found in the bow storage compartment. Position
shorter bar in the forward grooves. Position the
longer bar in the aft grooves. See photo below.
2
SHORT BAR
LONG BAR
1. Insert the hard back fi ller cushion in place and
align as needed. This completes the installation.
3
STORAGE
161