Additional Outboard System Checks - Regal LS4 Owner's Manual

Additional Outboard System Checks

Check these components/systems before starting
engine:
1. Tilt the outboard drive and check the propeller
for nicks and bent blades which will cause vibration.
2. While the outboard drive is tilted up check for
any debris around the water intakes on the vertical
drive shaft housing. These could cause the engine
to overheat.
3. Check steering system fasteners at the engine
and all related hydraulic hoses and connections for
signs of leaks including the ones under the helm.
4. While the shroud is off check for any engine oil
leakage or fuel puddling.
5. Check engine transom mounting fasteners for
tightness.
6. Repair any signs of leakage and loose fasteners
and hoses before attempting to start the engine.
7. Ensure that you use the 1/3 rule for determining
if you have adequate supplies for the trip. Fill up as
needed,
8. Check all throttle and shift cable linkages at
power head for tightness.
9. When finished, reinstall the engine shroud
ensuring all lock levers are secure.
140