Squawk Function - ABB JDF300 Operating Instruction

J D F 3 0 0 | F I E L D I N D I C ATO R | O I/ J D F 3 0 0 - E N R E V. B
17

Squawk Function

The Squawk function is used to make easier the identification of an installed device in the field by enabling a special display
behavior.
When the Squawk is enabled writing in the parameter "HMITB_SQUAWK" (index 37), the display of the selected device start to
blinks the string "Squawk".
When Squawk is enabled, on the display it starts to blink the word "Squawk" till when the "HMITB_SQUAWK" parameter is disabled
again or till when the user, who find the device in the field, push any button of the housing or on the display.
When the Squawk is enabled "once" still writing in the parameter "HMITB_SQUAWK" (index 37), the display of the selected device
starts to blink the string "Squawk" for few seconds after that it stops automatically and returns to normally display the selected
MAO_Input.