Mao Block Mapping - ABB JDF300 Operating Instruction

J D F 3 0 0 | F I E L D I N D I C ATO R | O I/ J D F 3 0 0 - E N R E V. B

MAO Block Mapping

Idx Parameter
0 BLOCK_OBJ
1 ST_REV
2 TAG_DESC
3 STRATEGY
4 ALERT_KEY
TARGET
ACTUAL
5 MODE_BLK
PERMITTED
NORMAL
6 BLOCK_ERR
7 CHANNEL
8 IN1
9 IN2
10 IN3
11 IN4
12 IN5
13 IN6
14 IN7
15 IN8
16 MO_OPTS
17 FSTATE_TIME
18 FSTATE_VAL1
19 FSTATE_VAL2
20 FSTATE_VAL3
21 FSTATE_VAL4
22 FSTATE_VAL5
23 FSTATE_VAL6
24 FSTATE_VAL7
25 FSTATE_VAL8
26 FSTATE_STATUS
27 UPDATE_EVT
28 BLOCK_ALM
Description / Range / Selections / Notes
In the Block Object data structure, there are different items describing the block characteristics. Execution period,
Number of parameters in the block, the DD Revision, Profile Revision, View Objects characteristics and so on
The revision level of the Static data associated with the Function Block. The revision level is incremented each time a
static parameter value (S – under Storage) in the block is changed.
The user description of the intended application of the block
The strategy field can be used to identify grouping of blocks. This data is not checked or processed by the block.
The identification number of the plant unit. This information may be used in the host for sorting alarms, etc.
AUTO / OOS
//
AUTO / OOS
AUTO
Bit 0 = Other
Bit 1 = Configuration Error
Bit 15 = Out of Service
0: Uninitialized
1 - 8:INPUT n selection
Input 1
Input 2
Input 3
Input 4
Input 5
Input 6
Input 7
Input 8
All set to 0 (not used in the JDF300)
Default = 0  not used
Default = 0  not used
Default = 0  not used
Default = 0  not used
Default = 0  not used
Default = 0  not used
Default = 0  not used
Default = 0  not used
Default = 0  not used
Not used in the JDF300
This alert is generated by any change to the static data
The block alarm is used for all configuration, hardware, connection failure or system problems in the block. The
cause of the alert is entered in the subcode field. The first alert to become active will set the Active Status in the
status parameter. As soon as the Unreported status is cleared by the alert reporting task, another block alert may
be reported without clearing the Active Status, if the subcode has changed
The selectable modes by the operator.
The mode the block is currently in.
Allowed modes that the target may take on
The common mode for the Actual.
MAO Not Scheduled
MAO.Channel = 0 (Uninitialized)
** Doesn't allow at the MAO to move out from OOS
CHANNEL = 1 (default)
Floating Point value + Status
NOT USED in the JDF300
25