22
J D F 3 0 0 | F I E L D I N D I C ATO R | O I/ J D F 3 0 0 - E N R E V. B
HMI Transducer Block (HMITB)
Overview
The HMI transducer block is a custom block with the task to manage different modalities to visualize the measure and on the
display of the JDF300 field indicator.
The HMITB block receives in input the variable selected by the MAO_Channel, and takes care to display its Values, Quality Status,
subtag, engineering unit in order to give a complete set of info to the user.
Block Diagram
IN_1
IN_2
IN_3
IN_4
IN_5
IN_6
IN_7
IN_8
Description
The HMI Transducer Block contains all the parameters allowing the display configuration.
While the Value and Quality Status are received from the selected MAO Input, the Subtag and Engineering unit to display together
with the value must to be configured inside this block writing in the "HMITB_INx_SUBTAG" and "HMITB_INx_UNIT CODE" where x
is the number of the input between 1 and 8.
There is also the possibility to enable/disable each of the 8 inputs into "HMITB_IN_ENABLE" and only the enabled inputs will be
scrolled automatically when the autoscrolling function is active into "HMITB_IN_SEQUENCE" In addition, the Quality Status can be
displayed as a text or a number according at what set into "HMITB_NUM_STATUS_ENA".
IN_ENABLE
D
MAO
BLOCK
MAO_CHANNEL
IN_SEQUENCE
HMI TB