ABB JDF300 Operating Instruction page 31

J D F 3 0 0 | F I E L D I N D I C ATO R | O I/ J D F 3 0 0 - E N R E V. B
Idx Parameter
43 UPDATE_EVT
44 BLOCK_ALM
45 ALARM_SUM
46 ACK_OPTION
47 ALARM_HYS
48 HI_HI_PRI
49 HI_HI_LIM
50 HI_PRI
51 HI_LIM
52 LO_PRI
53 LO_LIM
54 LO_LO_PRI
55 LO_LO_LIM
56 DV_HI_PRI
57 DV_HI_LIM
58 DV_LO_PRI
59 DV_LO_LIM
60 HI_HI_ALM
61 HI_ALM
62 LO_ALM
63 LO_LO_ALM
64 DV_HI_ALM
65 DV_LO_ALM
66 T1_RATE
67 BETA
68 GAMMA
Description / Range / Selections / Notes
This alert is generated by any change to the static data
The block alarm is used for all configuration, hardware, connection failure or system problems in the block. The
cause of the alert is entered in the subcode field. The first alert to become active will set the Active Status in the
status parameter. As soon as the Unreported status is cleared by the alert reporting task, another block alert may
be reported without clearing the Active Status, if the subcode has changed
The summary alarm is used for all process alarm in the block. The cause of the alert is entered in the subcode field.
The first alert to become active will set the Active Status in the status parameter. As soon as the Unreported status is
cleared by the alert reporting task, another block alert may be reported without clearing the Active Status, if the
subcode has changed
Used to set auto acknowledgment of the alarms
Alarm Hysteresis is the amount the PV must return within
the alarm limit before the alarm condition clears.
0 - 15
Critical Limit High producing the High-High Alarm
0 - 15
Advisory Limit High producing the High Alarm
0 - 15
Advisory Limit Low producing the Low Alarm
0 - 15
Critical Limit Low producing the Low-Low Alarm
0 - 15
Deviation High Limit producing the Deviation High Alarm
0 - 15
Deviation Low Limit producing the Deviation Low Alarm
High-High Alarm
High Alarm
Low Alarm
Low-Low Alarm
Deviation High Alarm
Deviation Low Alarm
Derivative 1st order filter
Set-point weight proportional part
Set-point weight derivative part
0 or > 0 expressed as percent of the OUT_SCALE span
(default =[0.5%])
Expressed in OUT_SCALE unit.
31