3.4 Digital Signal Connections
The PCM-3718 cards have two 8-bit digital input/output channels. The
digital I/O levels are TTL compatible. The following figure shows con-
nections of digital signals with other TTL devices:
To receive an OPEN/SHORT signal from a switch or relay, add a pull-up
resistor to ensure that the input is held at a high level when the contacts
are open. See the figure below:
PCM-3718 Series User Manual
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
DIO
D.GND
D.GND
28
TTL Devices
or