Table of Contents
Advertisement
Chapter 2 Installation
2.1 Initial Inspection
All cards in the PCM-3718 Series are carefully inspected mechanically
and electrically before shipment. It should be free of marks and scratches
and in perfect order when received.
As you unpack the PCM-3718 card, check for signs of shipping damages
(damaged box, scratches, dents, etc.). If it is damaged or fails to meet
specifications, notify our service department or your local sales
representative immediately. We will then make arrangement to repair or
replace the unit for you.
Discharge any static electricity on your body before touching the board
by touching the back of the system unit (grounded metal).
Also keep from materials of static electricity such as plastic, vinyl and
styrofoam.
Remove the PCM-3718 card from its protective packaging by grasping
the rear metal panel. Handle the module only by its edges to avoid static
electricity which could damage its integrated circuits. Keep the anti-
static packaging material for storage and protection when you have to
remove the module from its connector.
PCM-3718 Series User Manual
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
12
Advertisement
Table of Contents
