Table Of Contents - Advantech PCM-3718 Series User Manual

Chapter
1.1 Introduction ................................................................................. 2
1.2 Features........................................................................................ 2
1.3 Specifications............................................................................... 3
1.4 Locating Components.................................................................. 6
1.5 Daughterboards............................................................................ 8
1.6 Software Support ......................................................................... 9
1.7 Block Diagram........................................................................... 10
Chapter
2.1 Initial Inspection ........................................................................ 12
2.2 Switch and Jumper Settings....................................................... 13
2.3 Connector Pin Assignments....................................................... 18
2.4 Software Installation.................................................................. 20
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Contents
1 General Information ....................................... 2
1.3.1 Analog Input ............................................................................. 3
1.3.2 Analog Output (PCM-3718HO only) ....................................... 4
1.3.3 Digital Input and Output ........................................................... 4
1.3.4 Programmable Pacer ................................................................. 5
1.3.5 General ..................................................................................... 5
Figure 1.1: Connectors, Switches and VR Locations ............ 6
2 Installation ..................................................... 12
2.2.1 Base Address Selection (SW1) ............................................... 13
Table 2.1: Module I/O Addresses (SW1) ............................. 13
Table 2.2: PC bus Address Control ...................................... 13
2.2.2 DMA Channel and Timer Clock Selection (JP1) ................... 14
2.2.3 Channel Configuration, S. E. or diff. (JP2) ............................ 14
2.2.4 External Input or D I/O Selection (JP3) ................................. 15
2.2.5 Set P1 pin 19, 20 to AGND (JP4) (PCM-3718HO) ............... 16
2.2.6 Enable/Disable FIFO Selection (JP6) (PCM-3718HO only) . 16
2.2.7 FIFO IRQ Address Selection (JP9) (PCM-3718HO only) ..... 17
2.2.8 D/A Range Selection: 5/10V (JP10) (PCM-3718HO only) ... 17
2.2.9 Internal or External D/A Reference Voltage (JP11) (PCM-
3718HO only) ......................................................................... 17
2.3.1 Counter Cable ......................................................................... 20
Figure 2.1: Pin Assignment of Counter Cable .................... 20
Table 2.3: Mapping Table for DB9/2 x3 Pin Header Cable . 20
v

Table of Contents