Chapter 4 Register Structure And Format - Advantech PCM-3718 Series User Manual

Chapter 4 Register Structure and Format

The key to programming the PCM-3718 cards is to understand the func-
tion of the 16 registers. The PCM-3718 cards require 19 consecutive
addresses in the PC's I/O space. Each address corresponds to a card regis-
ter. The address of each register is specified as an offset from the card's
base address. For example, BASE+0 is the card's base address and
BASE+7 is the base address plus seven bytes. If the card's base address is
300h, the register's address is 307h. The following sections give detailed
information on the layout and function of each of the card's registers.
I/O Port Address Map
The following table shows the function of each register or driver and its
address relative to the base address of the module.
Table 4.1: I/O Port Address Assignments
Address
BASE+0
BASE+1
BASE+2
BASE+3
BASE+4
BASE+5
BASE+6
BASE+7
BASE+8
BASE+9
BASE+10
BASE+11
BASE+12
BASE+13
BASE+14
BASE+15
BASE+17
BASE+18
BASE+19
PCM-3718 Series User Manual
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Read
A/D low byte & channel
A/D high byte
MUX scan
DIO low byte (DIO 0-7)
N/A
N/A
N/A
N/A
Status
Control
N/A
DIO high byte (DIO 8-15)
Counter 0
Counter 1
Counter 2
N/A
N/A
A/D data and channels from FIFO
FIFO status
Write
Software A/D trigger
A/D range control
MUX scan channel & range
control pointer
DIO low byte (DIO 0-7)
D/A output data (PCM-
3718HO only)
D/A output data (PCM-
3718HO only)
FIFO interrupt control (PCM-
3718HO only)
N/A
Clear interrupt request
Control
Counter enable
DIO high byte (DIO 8-15)
Counter 0
Counter 1
Counter 2
Counter control
A/D data and channels from
FIFO (PCM-3718HO only)
N/A (PCM-3718HO only)
FIFO clear (PCM-3718HO
only)
30