Menu: Device Info; Menu: Service; Enable Or Disable Write Protection - ABB TTH300 Operating Instruction

58 TTH300 HEAD-MOUNT TEMPERATURE TRANSMITTER | OI/TTH300-EN REV. G
... 10 Operation
... Parameter description HART® (for HART®-devices from SW-Rev. 3.00)

Menu: Device Info

Menu / parameter
... / Device Info
Device Type
Serial Number Device
SerialNo. acc. Order
Software Version
Hardware Version
HART TAG
HART LONG TAG
HART Descriptor
HART Message
Operation Time

Menu: Service

Menu / parameter
... / Service
Factory reset
Reset to Order
Device Reset

Enable or disable write protection

1. Confirm 'Device Setup' with
protection'. Displays the current write protection setting.
Description
Displays device type.
7 or 8-digit serial number of the device electronic unit.
Serial number of the device (serial number in accordance with order)
Displays device software version.
Displays device hardware version.
Displays the HART Tag.
Display the HART long tag.
Displays the HART Descriptor.
Display the HART message.
Displays device the operation time.
Description
Device restarts with factory settings applied.
Device restarts with settings according to the customer order.
Device restarts without configuration changes.
and select the sub item 'Write
2. Use the "Edit" key to edit the current write protection
configuration (on/off) and confirm with the
3. The now current write protection configuration is displayed.
key.