Profibus Pa® Und Foundation Fieldbus® Parameter Overview - ABB TTH300 Operating Instruction

TTH300 HEAD-MOUNT TEMPERATURE TRANSMITTER | OI/TTH300-EN REV. G
PROFIBUS PA® und FOUNDATION Fieldbus® Parameter overview
Note
This overview of parameters shows all the menus and parameters available on the device. Depending on the version and
configuration of the device, not all of the menus and parameters may be visible in it.
Device Setup 1
Device Info 2
3
Communication
Service 4
Display 5
Calibrate 6
* PROFIBUS PA only
Sensor 1
R-Connection 1
two-wire correction 1
Thermocouple RJ 1
Ext. CJC Temp 1
Sensor 2
R-Connection 2
two-wire correction 2
Thermocouple RJ 2
Ext. CJC Temp 2
Measured Type
Device ID
Serial Number
Software Version
Hardware Version
Device Tag Name
Description
Operation Time
Device Tag Name
Bus Address
Ident Number*
Ident Number Profile 1)
Device temperature
Sensor 1
Sensor 2
Op. Time / Temp.
Communication
Language
Contrast
Operator Page 1
Operator Page 2
Reset Device
Reset with Defaults
MIN Value
MAX Value
Line 1
Line 1
Line 2
59