ABB TTH300 Operating Instruction page 18

18 TTH300 HEAD-MOUNT TEMPERATURE TRANSMITTER | OI/TTH300-EN REV. G
5 Product identification
Name plate
Note
Products that are marked with the adjacent symbol
may not be disposed of as unsorted municipal waste
(domestic waste).
They should be disposed of through separate
collection of electric and electronic devices.
Note
The ambient temperature range
refers only to the transmitter itself and not to the sensor
element used in the measuring inset.
For devices with PROFIBUS PA or FOUNDATION Fieldbus, the
device-ID is also specified.
1 Manufacturer, manufacturer address, manufacturing year - week
2 Safety integrity level, SIL logo (optional with HART transmitter)
3 CE mark (EU conformity), if not on additional plate
4 Type designation / model
5 Transmitter communications protocol (HART, FF, PA)
6 2D barcode for serial number in accordance with order
7 Serial number of the device electronics (7 or 8 digits)
8 Software revision
9 Hardware version
0 'Follow product documentation' symbol
k l m HART transmitter:
k Set measuring range of the transmitter
l Measuring point tag (TAG) in accordance with order (optional)
m Set sensor type and circuit type
l m Transmitter FOUNDATION Fieldbus or PROFIBUS PA:
l Measuring point tag (TAG) in accordance with order (optional)
m DEVICE_ID or Ident_Number
n Ambient temperature range, on additional plate for Ex versions
o Transmitter specification (supply voltage range, output current range,
communications protocol)
p Coding of the type of protection of the device (in accordance with
ordering information)
q Serial number of the device (serial number in accordance with order)
Figure 7: HART name plate (example)
provided on the name plate
n
Figure 8: PROFIBUS PA name plate (example)
Figure 9: FOUNDATION Fieldbus name plate (example)
Devices with an explosion-proof design are marked with the
following special data plate.
1 Type designation in accordance
with approval
2 Type designation
3 Temperature class of the
explosion-proof design
Figure 10: Additional plate for explosion-protected apparatus (example)
Note
The name plates displayed are examples. The device
identification plates affixed to the device can differ from this
representation.
4 CE-mark (EU conformity) and
notified body for quality
assurance
5 Ex-marking
6 IP rating explosion-proof design