Equinox Systems PPM3 MK2 User Manual page 26

13 Atmel ATtiny (AVR)
14 Atmel T89C51 Rx2
(Temic)
15 Atmel AT24Cxxx
16 Atmel AT24HCxxx
17 Atmel AT34Cxxx
18 Philips P89C 51Rx2
19 Zensys ZW series
Please note:
1. JTAG algorithms
•
The ATmega AVR JTAG programming algorithms require a chargeable 'JTAG Upgrade
License' to be purchased.
•
Firmware 3.07 or above should be used for JTAG programming.
2. 24Cxxx Serial EEPROM I2C algorithms
•
The 24Cxxx Serial EEPROM algorithms require a chargeable '24Cxxx Upgrade License' to be
purchased.
•
For I2C programming of 24Cxxx Serial EEPROMs, please use firmware 3.07 or above.
PPM3 MKII Programmer - User Guide - V1.04 - 10
HV SPI (+12V
VPP)
UART Boot
AC2 Loader
Ix2
CC01
I2C
I2C
I2C
UART Boot
66x Loader
LV SPI
th
ATtiny 11 / 12 / 15L
(including 'L' versions – Vcc must be +5V with
a +12V Vpp applied to the RESET pin)
HV ISP support for the ATtiny13, 25, 45 etc is
not currently available.
T89C51 RB2 / RC2 / RD2
T89C51 AC2
T89C51 IB2 / IC2
T89C51CC01
(Support for the AT89Cxxxx devices is not
currently available)
AT24C 01A / 01B / 11 / 02A / 02B / 04(A/B) /
08(A/B) / 16(A/B) / 32(A/C/SC) / 64(A/B) /
128(B/SC) / 256B / 512(B/SC) / 1024(B/SC)
AT24HC 02B / 04B
AT34C 02C
P89C51 RB2 / RC2 / RD2
P89C 660 / 662 / 664 / 668
ZW0102 / ZW0201 / ZW0301
May 2008
S
S
U
U
U
S
S
15