Table of Contents
Advertisement
Product Documentation
This manual provides an overview of the contents of the PPM3 Programming System plus associated
hardware and software. References may be made to other hardware and software products which are
not covered in detail in this manual. Please refer to the table below for a list of sources of
documentation and/or browse to
Software:
viii
http://www.equinox-tech.com/products/downloadsearch.asp
EQTools Script Builder – Manual
This software is used to create and upload 'Programming Projects' to
the programmer.
The following sources of documentation are available for this
software:
•
Installation and Getting Started Guide (pdf manual)
•
Help file
ASCII Text Communications Protocol – Application Note
This protocol can be used to control the programmer from an
external controller via RS-232.
The following sources of documentation are available for this
protocol:
•
Application Note – AN110 for a full description.
ISP Pro – Manual
This software is used to control the programmer in a production
environment. It is not supplied as standard with this programmer.
The following sources of documentation are available for this
software:
•
Installation and User Manual
•
Help File
Upload Wizard - Standalone Project Upload Utility
This software utility is used to upload Programming Projects to any
Equinox programmer. These projects can then be used in
Standalone Mode, i.e. without a PC.
•
Please follow the on-screen instructions within the Upload
Wizard utility itself.
PPM3 MKII Programmer - User Guide - V1.04 - 10
th
May 2008
Advertisement
Table of Contents
