Table of Contents
Advertisement
2.6 Standalone Keypad Mode
2.6.1 Overview
In 'Standalone Mode', the programmer is not connected to the PC and is controlled via the push
buttons on the front panel instead. The Programmer LCD and the LED Status Indicators are used to
display the current status of the programmer.
LCD Display
Buttons
Status LED's
PRESS YES TO
PROGRAM TARGET
This mode is ideal for both field and production ISP requirements as the programming data is held
locally in FLASH memory on the programmer so a PC is not required.
A valid Project Collection containing at least one Programming Project must be uploaded to the
programmer before attempting to use Standalone Mode.
th
PPM3 MKII Programmer - User Guide - V1.04 - 10
May 2008
33
Advertisement
Table of Contents
