Software Installation - Equinox Systems PPM3 MK2 User Manual

2.3.3 Software Installation

The PPM3 programmer comes with the software suite called EQTools as standard. The latest version
of this software which was available at the time of shipping is supplied on CD-ROM with the
programmer. However, this software version is likely to have been superseded by a newer version.
Please check the Equinox website for the latest version of this software.
Locate the latest version of the EQTools software by browsing to:
http://www.equinox-tech.com and clicking on the <Downloads> tab.
EQTools versions are quoted as e.g. EQTools V2.1.0 Build 412
The filename for this version would be 'eqtools210_412.exe'
For further information, please locate the 'EQTools – Getting Started Guide' PDF document either
on the CD-ROM supplied with the programmer or from the Equinox Web Site. Refer to Section 2 of
the guide for detailed EQTools installation instructions.
th
24 PPM3 MKII Programmer - User Guide - V1.04 - 10 May 2008