Overview Of I/O Connector Modules - Equinox Systems PPM3 MK2 User Manual

Production isp programmer

Table of Contents

1.3.4 Overview of I/O Connector Modules

There are currently four different I/O Connector Modules available as detailed in the table below:

Order Code

Description

EQ-IOCON-1

I/O Connector Module 1 (SPI) – Fast Connect Version

I/O connector module for In-System Programming (ISP) of Atmel microcontrollers

using SPI protocol (Fast Connect version)

This module plugs into the PPM3 and provides the relevant I/O connectors for SPI

programming of Atmel devices.

Features:

•

EQ-IOCON-2

I/O Connector Module 2 (SPI) – Wire-wrap version

I/O connector module for In-System Programming (ISP) of Atmel microcontrollers

using SPI protocol (wire-wrap version)

Features:

•

PPM3 MKII Programmer - User Guide - V1.04 - 10

Plugs into suitable Equinox programmer eg. PPM3 Module

Atmel 10-way IDC ISP Header

Atmel 6-way IDC ISP Header

Equinox 10-way IDC ISP header

'Fast Connect' clip-in connectors for direct wiring to Test Fixture i.e wires

from bed-of-nails probe wires

Screw terminals for power connections

Target Vcc Status LED

Link to connect / isolate the programmer Vcc from the Target Vcc

Plugs into suitable Equinox programmer e.g. PPM3 Module