Product Documentation and Software
Overview
This manual provides an overview of the contents of the 'ISPnano Programming Range' plus
associated hardware and software. References may be made to other hardware and software
products which are not covered in detail in this manual.
Please refer to the table below for a list of sources of documentation and/or browse to
http://www.equinox-tech.com/products/details.asp?ID=1440&displ=tl
Software:
ISPnano Series IV-ATE Programmer - User Manual - V1.04 – 21/02/2014
EQTools Script Builder – Manual
This software is used to create and upload 'Programming Projects' to
the programmer.
The following sources of documentation are available for this
software:
•
Installation and Getting Started Guide
•
Help file
ASCII Text Communications Protocol – Application Note
This protocol can be used to control the programmer from an
external controller via RS-232.
The following sources of documentation are available for this
protocol:
•
Application Note – AN110
ISP Pro – Manual
This software is used to control the programmer in a production
environment. It is not supplied as standard with this programmer.
The following sources of documentation are available for this
software:
•
Installation and User Manual
•
Help File
ix